Gold3535.8 USD/oz +0.06%Silver41.2 USD/oz -0.20%Platinum1294.8 USD/oz +0.08%Palladium890.5 USD/oz 0.00%Rhodium8673.0 USD/oz 0.00%Copper10800.9 EUR/t +0.01%Gold3535.8 USD/oz +0.06%Silver41.2 USD/oz -0.20%Platinum1294.8 USD/oz +0.08%Palladium890.5 USD/oz 0.00%Rhodium8673.0 USD/oz 0.00%Copper10800.9 EUR/t +0.01%Gold3535.8 USD/oz +0.06%Silver41.2 USD/oz -0.20%Platinum1294.8 USD/oz +0.08%Palladium890.5 USD/oz 0.00%Rhodium8673.0 USD/oz 0.00%Copper10800.9 EUR/t +0.01%

What Is a Catalytic Converter and What Does It Do in a Car?

Reading Time: 14 min

Written by:

METALAXIS

Finland’s leading recycling industry expert company

Table of Contents

Overview: This guide explains what the catalytic converter in a car’s exhaust is made of, what happens inside it chemically, how the oxygen sensors and the on-board diagnostics (OBD) system monitor it, and what is checked at the periodic vehicle inspection (katsastus) in Finland. Finally, we explain why the part still has value when the car is scrapped.

Key Takeaways

  • A catalytic converter is a metal housing fitted to the exhaust, with a honeycomb inside that is coated with precious metals.
  • It turns carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) mainly into carbon dioxide, water and nitrogen.
  • According to the Science History Institute, today’s three-way converters can convert as much as 98% of these three gases into less harmful ones.
  • Platinum and palladium mainly handle oxidation, while rhodium reduces nitrogen oxides.
  • How a car catalytic converter works depends on keeping the air-fuel mixture close to lambda 1. At the Finnish inspection, the permitted range is 0.97-1.03.
  • Under Traficom’s inspection criteria, a missing converter is a reason for failure when the car is required to have one.
  • The precious metals are not used up in the reactions, so they are still in the coating when the car is scrapped. According to Metalaxis, a used converter is typically worth between EUR 50 and EUR 900 in Finland (2026).
If you are wondering what is a catalytic converter, the short answer is this: it is a metal housing in the car’s exhaust, between the engine and the silencer, with a precious-metal-coated honeycomb inside that cleans the exhaust gas. A catalytic converter does not filter gases like a sieve. It changes their chemical make-up, so that toxic carbon monoxide, unburnt hydrocarbons and nitrogen oxides leave the tailpipe mainly as carbon dioxide, water vapour and nitrogen.When people ask what does a catalytic converter do, the key point is that it does two chemical jobs at once: it oxidises and it reduces. The purpose of a catalytic converter is to keep a car’s exhaust emissions within the permitted limits throughout the car’s life. This guide covers the part’s structure, chemistry, monitoring and inspection, and what happens to the converter when the car reaches the end of the road.

What is a catalytic converter made of?

A catalytic converter is an emissions control device built in layers. The outer layer is a metal shell, and inside it is a ceramic or metal honeycomb. The honeycomb has a large number of thin, parallel channels that the exhaust gas flows through.The honeycomb is the heart of the invention. According to the Science History Institute, the honeycomb structure vastly increased the surface area of the catalyst that comes into contact with the exhaust. Chemistry LibreTexts describes the next layer: the channel walls are coated with porous aluminium oxide, known as the washcoat, which increases the surface area again and holds the precious metals – platinum, palladium and rhodium.
LayerWhat it isWhat it does
ShellMetal housing connected to the exhaustProtects the honeycomb and guides the gas through it
HoneycombCeramic or metal structure with many thin channelsIncreases the surface where the gas meets the catalyst
WashcoatPorous aluminium oxide layer on the channel wallsAdds more surface area and holds the precious metals
Precious metalsPlatinum, palladium and rhodiumSpeed up the reactions without being used up
Source: Science History Institute; Chemistry LibreTexts.So the valuable part is invisible: a thin coating inside the honeycomb channels. That is why you cannot judge a converter’s value from the outside, and why it is worth selling the part intact and unopened.

What does a catalytic converter do to exhaust gases?

A catalytic converter turns three harmful gases into less harmful ones through two types of reaction. Oxidation adds oxygen to carbon monoxide and hydrocarbons, producing carbon dioxide and water. Reduction removes oxygen from nitrogen oxides, leaving nitrogen. The precious metals speed up both reactions but are not consumed by them.
GasWhere it comes fromReactionEnd productMain metal
Carbon monoxide (CO)Incomplete combustionOxidationCarbon dioxide (CO2)Platinum, palladium
Hydrocarbons (HC)Unburnt fuelOxidationCarbon dioxide and water (H2O)Platinum, palladium
Nitrogen oxides (NOx)Nitrogen reacting with oxygen in the hot combustion chamberReductionNitrogen (N2)Rhodium
Source: Chemistry LibreTexts; Royal Society of Chemistry.It is highly effective. According to the Science History Institute, today’s three-way converters can convert as much as 98% of these three gases into less harmful ones. So the answer to what does a catalytic converter do is not one reaction but three, all happening in the same honeycomb at the same time.The scarcity of the metals explains part of the value. According to the Royal Society of Chemistry, catalytic converters account for about half of annual platinum demand, and about 80% of rhodium is used in car catalytic converters, where it reduces nitrogen oxides.

What is the purpose of a catalytic converter in a car?

What is the purpose of a catalytic converter in a car? It is the final stage of the emissions control system. The engine and its control unit try to burn the fuel as cleanly as possible, and the converter deals with whatever is left over from combustion. Without one, a petrol car could not meet today’s emission limits.In Finland, catalytic converters became common at the turn of the 1980s and 1990s. The Finnish Government adopted a decision in principle on exhaust emission limits on 7 April 1988, and low-emission petrol cars received a FIM 3,500 reduction in car tax during the transition period. According to Statistics Finland, by the end of 2003, 63% of passenger cars in Finland were fitted with a catalytic converter or otherwise had low-emission technology.A catalytic converter is also a legal requirement. If a car was originally required to have one, it cannot be removed without the car failing its inspection. Inspection is covered in more detail below.

How a catalytic converter works, step by step

How a catalytic converter works comes down to heat and the right gas mixture. The exhaust gas passes through the honeycomb in four stages:
  1. Warming up. A cold honeycomb does not yet clean the gases effectively. That is why in many modern cars the converter is placed close to the exhaust manifold, so it heats up quickly after a cold start. On short winter journeys, the honeycomb spends a larger share of the trip below operating temperature.
  2. Flow into the channels. The exhaust gas spreads into the honeycomb’s many thin channels and touches the coating along their whole length.
  3. Reactions in the coating. Platinum and palladium oxidise carbon monoxide and hydrocarbons, while rhodium reduces nitrogen oxides.
  4. The cleaned gas moves on. The gas passes the rear oxygen sensor, goes through the silencer and leaves through the tailpipe.
Because how a catalytic converter works depends on heat, the first few minutes after starting are the dirtiest part of a car’s journey in terms of emissions.

How a car catalytic converter works with lambda control

How a car catalytic converter works depends on the engine’s air-fuel mixture. According to Chemistry LibreTexts, a three-way converter works best when the ratio of air to fuel is close to the ideal point, known as lambda 1. In a lean mixture, with too much oxygen, the reduction of nitrogen oxides suffers. In a rich mixture, with too little oxygen, the oxidation of carbon monoxide and hydrocarbons suffers.Two oxygen sensors, also called lambda sensors, keep the mixture in check. The front sensor, before the converter, measures the oxygen content of the exhaust, and the engine control unit adjusts the amount of fuel accordingly. The rear sensor, after the converter, shows how well the honeycomb is working. The OBD system compares the two signals, and as the converter weakens, the rear sensor’s signal starts to look like the front sensor’s. The engine warning light then comes on, and a fault code, typically P0420, is stored.This is why how a car catalytic converter works is never just about the converter itself. A faulty oxygen sensor, a misfire or an engine that burns oil can strain the honeycomb or make it look faulty. Read more about the warning signs of a failing converter.

What happens to exhaust gas on its way out of the engine?

Follow the gas through five stops. It starts out toxic and ends up mostly harmless.
1Engine
Combustion produces three harmful gases:
CO carbon monoxideHC hydrocarbonsNOx nitrogen oxides
2Front oxygen sensor
Measures oxygen while the control unit keeps adjusting the mixture towards lambda 1. That is why its signal swings:
▁▇▁▇▁▇▁▇▁▇

Too lean: NOx is not reduced. Too rich: CO and HC are not oxidised.
3Catalytic converter
Up to 98% of the three gases is turned into less harmful ones.
Platinum and palladium oxidise, rhodium reduces. The honeycomb works effectively only once warmed up.
4Rear oxygen sensor
Checks the result against the front sensor.
Healthy: the signal is steady
▅▅▅▅▅▅▅▅▅▅
Worn: the signal swings like the front sensor
▁▇▁▇▁▇▁▇▁▇
When the two signals start to match, the warning light comes on and a code, typically P0420, is stored.
5Tailpipe
What comes out is mainly:
CO2 carbon dioxideH2O water vapourN2 nitrogen
When the car is scrapped
The precious metals are not used up in the reactions, so they are still in the honeycomb. Keep the converter intact, photograph its code and ask for a price estimate based on analysis.
Sources: Science History Institute; Chemistry LibreTexts; California Air Resources Board (OBD). Metalaxis – metalaxis.fi

How do petrol and diesel catalytic converters differ?

A petrol car usually has a three-way converter that treats all three gases in the same honeycomb. Diesel exhaust always contains plenty of oxygen, so nitrogen oxides cannot be reduced in the same way. That is why in a diesel the job is split across several parts.According to the US Department of Energy’s Alternative Fuels Data Center, in a modern diesel car an oxidation catalyst (DOC) treats carbon monoxide and hydrocarbons, a particulate filter (DPF) traps soot, and a selective catalytic reduction (SCR) system reduces nitrogen oxides using a urea-based additive, sold in Europe as AdBlue. Not all of these parts contain the same amount of precious metal, so their recycling value varies. See how to tell a particulate filter from a catalytic converter.Hybrid cars have a petrol engine and therefore a three-way converter too. In Metalaxis’s experience, hybrid converters typically sit at the top of the value range, while units from small cars are at the bottom.

What is checked on the catalytic converter at inspection?

In Finland, the periodic inspection checks that the converter works either through the OBD system or with an emissions test, depending on the age of the car. Inspectors also check that a required converter is fitted and compliant. The rules are set out in Traficom’s regulation on the assessment criteria for periodic vehicle inspections (in Finnish).
SituationWhat is checkedLimit or result
Petrol car, up to 10 years since first registrationOBD check: warning light and fault memoryAn incorrectly working warning light or a stored fault code between P0001-P0499 or P0650 is a major defect (fail)
Petrol car with a three-way converter, over 10 years oldEmissions test at raised engine speed (at least 2,000 rpm)Lambda 0.97-1.03 and CO no more than 0.3%. For newer OBD cars (for example, passenger cars registered from 1 January 2001), CO no more than 0.2%, plus an OBD check
Lambda control not workingEmissions checkMajor defect (fail)
Required catalytic converter missingExhaust system checkFail
Catalytic converter not compliantExhaust system checkFail
Source: Traficom, assessment criteria for periodic vehicle inspections. Checked 16 November 2026.In practice, P0420, the code for converter efficiency, falls within the range that leads to a fail. If the warning light is on before the inspection, it is worth having a garage find the cause in advance.

What happens to a catalytic converter when the car is scrapped?

When a car is scrapped or the converter is replaced, the precious metals are still in the coating because they are not used up in the reactions. That makes a used converter a valuable source of raw materials. The quantities are small: according to the analytical instruments company Thermo Fisher Scientific, recycled converters in the US contain recoverable platinum group metals ranging from about 1-2 grams for a small car to 12-15 grams for a large truck.The value depends on the model, the precious metal content and the day’s metal prices. According to Metalaxis, a used converter is typically worth between EUR 50 and EUR 900 in Finland in 2026. Metalaxis determines the value through chemical analysis and a database of more than 30,000 analysed models, and payment is made by bank transfer, usually on the same or the next banking day.Before you sell, remember three things:
  • Keep the converter intact. An opened or emptied honeycomb has lost some or all of its value.
  • Do not grind or paint over the identification markings on the shell, as the code speeds up the valuation.
  • Take a clear photo of the code and send it for a price estimate.
For more background, read why recycling supports the circular economy and which types can be recycled.

Conclusion

A catalytic converter is a small metal housing that does a big job. Inside its honeycomb, platinum and palladium oxidise carbon monoxide and hydrocarbons, and rhodium reduces nitrogen oxides to nitrogen. When someone asks what is the purpose of a catalytic converter, the answer fits in one sentence: it turns an engine’s most harmful exhaust gases into less harmful ones for as long as the car is on the road.When a converter reaches the end of its life, its precious metals can be recovered and put back into use. If you have a used catalytic converter, send Metalaxis a photo of its code via WhatsApp, by phone or by email, and you will receive a price estimate based on analysis. We serve customers across Finland.

FAQ

A catalytic converter is a metal housing fitted to a car’s exhaust, with a honeycomb inside that is coated with precious metals. It turns harmful exhaust gases such as carbon monoxide, hydrocarbons and nitrogen oxides into less harmful ones.

The catalytic converter sits in the exhaust between the engine and the silencer. In many modern cars it is right next to the exhaust manifold, so it heats up quickly after a cold start. There is usually an oxygen sensor in front of it and another behind it.

The converter’s coating contains platinum, palladium and rhodium. Platinum and palladium oxidise carbon monoxide and hydrocarbons, and rhodium reduces nitrogen oxides. The amount of metal is small, typically a few grams, but it determines the part’s value.

A car can technically run without a catalytic converter, but emissions rise and the warning light comes on. Under Traficom’s inspection criteria, a missing converter on a car that requires one is a reason for failure, so the car will not pass its inspection.

The most common sign is the engine warning light and a stored fault code, typically P0420. Other signs can include loss of power, rattling from the exhaust or a failed emissions test at inspection. It is worth having a garage find the cause, as the fault may also be in an oxygen sensor.

Yes. A modern diesel car has an oxidation catalyst that treats carbon monoxide and hydrocarbons. It usually also has a particulate filter and an SCR system that reduces nitrogen oxides with the help of AdBlue.

An old catalytic converter is worth selling for recycling while it is intact. Its precious metals can be recovered, and according to Metalaxis, a used converter is typically worth between EUR 50 and EUR 900 in Finland in 2026, depending on the model and metal content.

Aluminum Recycling: Why Is It the Most Recyclable Metal?
Aluminum is an exceptional metal known for its outstanding recyclability. Both individuals and businesses can benefit from recycling aluminum, both financially and environmentally. In Finland, where...
Data Security in Circuit Board Recycling
Introduction: Recycling electronic devices is important for both the environment and the economy. Printed circuit boards contain valuable metals, and recovering them reduces the consumption of natural...
Metal Recycling and Prices Today
Metalaxis Metalaxis is a reliable partner in metal recycling, providing professional and environmentally responsible services. Introduction: Metal recycling is currently of interest to both households...

Contacts

WhatsApp

+358405504119 +358505549256

Viber

+358405504119 +358505549256

If you have any queries, you can get in touch with us through phone, email or by filling out the contact form.

Etu-Hankkion katu 20, 33700 Tampere, Finland

We offer services across all of Finland.